Click image to view full size image
Description:
1 metal laser machine2 more advantages especially on metal cutting
3 cnc laser
4 plasam cutting machine
CNC PLASMACUTTING MACHINE PC1325 MODEL
PC1325 desktop CNC plasmacutting machine is the representative product of our company. It ismainly designed for cutting small metal sheet and the valid cuttingrange is 1300-2500mm.
PC1325 desktop CNC plasmacutting machine adopts ballscrew intermediate driver, avoiding theswing of the beam follow-side caused by the bilateral drivers, andboth sides use precise linear rail position. The beam is made ofrectangle steel pipe, and driven with ballscrew and double linerrails. The whole working speed can reach 15000mm/min, and aresuitable for cutting metal sheet of thickness of0.6-10mm.
When plasma cutting, the steelplates are placed on the material supported shelf, but the levelheight is very different. In order to guarantee the cuttingquality, we need to continuously adjust the relative distancebetween the cutting gun and the steel plate, therefore weconfigured it with arc-pressure height adjuster. When plasmacutting, there will be more dust generated, in order to reducepollution, we installed water tank below the grid shelf of thetable, and configured with water input/output values, the dust bycutting are mostly absorbed by the water.
- PC1325 desktop CNC plasmacutting machine is specially designed for cutting small thinnermetal sheet.
- Adopt American HYPERTHERMplasma power, cut better and last longer
- Equiped with arc-pressureheight adjuster which can automatically adjust the relativedistance between the cutting gun and the steel plate.
- Machine table has a flumewhich can reduct cutting dust significantly.
Specification:
X.Y axis working area:1300x2500mm
Z axis working area:200mm
Table size:1450x2900mm
Max speed:0-250000mm/min
Max working speed:20000mm/min
Working delicacy:0.02mm
Reposition accuracy:0.05mm
Max feeding height:200mm
Engraving command: Gcode*
Software: FASTCAM
Max power consumption:10KW
Plasma power supply: AmericanHYPERTHERM
Work type: stepper
Driver: stepper orServo
Net weight: 1000kg
Working Voltage: AC 380V,50Hz
Manner of receiving data:PCI
Running circumstancetemperature: 0-45°C
Relative hunidity:30%-75%
Work table: flume
Main parameters for HYERTHERMpower supply:
A: Carbon steel B:Stainless steel C: Aluminium
Classification | Type | Cutting Current | Perforate cuttingthickness(mm) | Plasma gas/Protectiongas |
Air plasma | Powermax 1000 | 20-60 | 10(A, B, C) | Air(A) Air or N2(B, C) |
Powermax 1250 | 25-80 | 10(A, B, C) | Air(A) Air or N2(B, C) | |
Powermax 1650 | 30-100 | 12(A, B, C) | Air(A) Air or N2(B, C) |
plasam cutting machine pc1325
